Results 1 to 2 of 2

Thread: Impose not reading correct size

  1. #1
    Join Date
    Jul 2014

    Default Impose not reading correct size

    Good Afternoon.

    I'm having trouble with Impose in the new update to 6.3

    Let's say I have a 4x6 postcard with a .125 bleed built into it. When I drag and drop the file into Command Workstation and load it into Impose, the full size with bleed, which would be 4.25x6.25, is shown, but the cut size is not.

    I can fix it by clicking User Defined and changing it is Based on Crop Box and changing it back to User Defined.

    I do have it set to User Defined in the settings of Command Workstation.

    I am not running 6.3 on the server itself. We don't use the server as a daily computer.

    I'm running Windows 7 64 bit with 32 gigs of RAM and an i7 processor.

    This is the first time I've run into this issue.

    I had to downgrade to 6.2 to fix the issue, but I have issues with Impose crashing Command Workstation. I can live with the crashing, but not with the wrong size. The size problem becomes a big issue when we are very busy.

    Any help is greatly welcomed.

    Thank You.

  2. #2
    Join Date
    Apr 2009
    Minneapolis, MN


    Thank you for your support of Fiery Forums.

    As FYI... this forum is just about done, as we are almost 100% transitioned over to communities. Can you register, and re-post your question here?

    I'm sure you will get a quick response.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts