CPS 5 Inline Device Support?

[Doyle]

What inline devices are supported? From the latest release notes it appears that it might be in Express Profiler only.

In Calibration will inline devices be supported?

I have demo running on a MacBook Pro and the FWA of the Versant 2100 is not listed.

I don't what to install the demo on the Server to test since I will need to update the SMSA.

So is there more documentation some where as to what inline devices are supported and by what modules?

[DragonLeaves]

I saw support for the Iridesse FWA. In any case why would you ever want to calibrate with a blunt RGB scanner when you have a spectrophotometer???

[Doyle]

Actually in practice I have found the FWA to be more consistent for calibration than ready the small (use the large patch setting) patches on one sheet of paper. Now for creating a output profile I would not want to use the FWA. The biggest issue with using CWS for calibration you a forced to use the exact same size of paper that the calibration was initially created with. That is one reason it is nice to use FCPS for calibration.

[Lou_P]

Hi Doyle.

I am checking. The FWA may be supported for calibration but we would not recommend it for profiling.

I'll let you know what I find out.

~Lou

[nealfaub]

Doyle, as Lou said it is supported for calibration but would not recommend for profiling. You can test on CPS 5 in demo mode without updating your FSMA if you want.

Hi Doyle.

I am checking. The FWA may be supported for calibration but we would not recommend it for profiling.

I'll let you know what I find out.

~Lou

[Doyle]

Doyle, as Lou said it is supported for calibration but would not recommend for profiling. You can test on CPS 5 in demo mode without updating your FSMA if you want.

This is wrong information the V2100 FWA is not listed.