+ Reply to Thread
Results 1 to 2 of 2

Thread: Would like JMF to auto "Process and Hold" when submitted

  1. #1
    Join Date
    Aug 2016
    Posts
    3

    Default Would like JMF to auto "Process and Hold" when submitted

    Hello,
    We have been submitting JDF to hotfolders for awhile doing okay but have had problems getting JMF to work as well. One of our latest things with our JMF testing is when the job gets to the Commmand Workstation job list we would like it to auto "Process and Hold" like our JDF's do when we use the Hot Folder Path but we are not seeing a setting for the JMF workflow to initiate this. Right now it just shows up as "Spooled" and then the operator has to choose to Process the job. I know that doesn't sound like much but we send 300-400 single quantities per day and it makes a difference in our workflow. Any help would be much appreciated. thanks Jgreer


    Running Fiery Command WorkStation Package : 6.1.0.179
    Fiery Command WorkStation : 6.1.0.28


    To Ricoh 9110's

  2. #2
    Yusuke_K is offline Fiery Forum Expert Contributor Yusuke_K is on a distinguished path
    Join Date
    Jul 2009
    Posts
    75

    Default

    Hi there!

    Sorry about my late reply. One easy way to do this is to configure JDF settings of your Fiery from Fiery Configure to make the default action to do "Process and hold".

    You can go to this seeting from Command WorkStation-> Device Center-> Configure -> Job Submission -> JDF Settings -> Job Action.

    Hope this helps!
    Yusuke

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts