Kind of puzzled by this. Using CPS 4.9.4.28

When running the Verify module, and comparing to G7 grayscale, a reading may fail, yet all the columns with the Delta E readings are green with "OK".

However, if I create a custom reading using the same parameters of G7, and then read the patches, it will have what appears to be "the way it should be" indicators: Green/OK for pass, Yellow/OK for pass, but getting close to failing, and Red/Not OK for a patch out of tolerance.

I'll attach a PDF since that will visually display what I'm referring to.MGX_F_1_18_Verify.pdf9110C_Soporset_03112018_VERIFY_Fail_NEW PROFILE_CustomNoChangesToTolerances.pdf