+ Reply to Thread
Results 1 to 2 of 2

Thread: Imposition Problem

  1. #1
    Join Date
    Nov 2017
    Posts
    3

    Default Imposition Problem

    Hello
    I was hoping that someone may be able to help me with an imposition problem that I have encountered.
    We currently have a Canon image press C7000VP and am running Fiery Workstation 5.3.
    I have a job that comes in twice a month and consists of around 350 individual books. They are the same size but vary from having between 66 - 80 pages. At the moment I am printing them on their own on a SRA4 sheet. They are then trimmed and perfect bound. What I would really like to do is impose them 2up
    ( 2 different books as we only need one copy of each) with a 6mm gutter on a sra3 sheet. I have been told it cannot be done and been imposing them myself by replacing links in indesign which is very time consuming.
    Thanks for reading and I really hope someone may have a suggestion.
    Grant

  2. #2
    Join Date
    Sep 2009
    Posts
    19

    Default

    I don't know about printing 2 different books in an imposition but I would do a single book booklet imposition (which you can control the size of the gutter on) then cut and stack into a book to perfect bind. Should be the same amount of clicks as what you're talking about.
    Xerox Versant 2100
    Fiery FS100 Pro
    Fiery Command WorkStation Package : 6.1.0.179
    Fiery Command WorkStation : 6.1.0.28

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts