+ Reply to Thread
Results 1 to 2 of 2

Thread: ImagePress G100 calibration issue

  1. #1
    Join Date
    Aug 2017
    Posts
    1

    Unhappy ImagePress G100 calibration issue

    Hi.

    I have a issue with a G100 Fiery on a Canon ImagePress 800.
    The issue is that when I run a calibration on heavy media the target calibration page does not contain any yellow reference, if I calibrate for plain paper then all is ok, the fiery has been reformatted and I have loaded command workstation on a separate computer,any suggestions?

  2. #2
    el_tren2003 is offline Fiery Forum Expert Contributor el_tren2003 is on a distinguished path
    Join Date
    Jul 2009
    Location
    Lisbon
    Posts
    115

    Default

    Hi Kevin,
    Which version is your controller running? 1.0, 1.1or 1.21?
    To calibrate, are you using the reader of the printer (colorcal) or a spectrophotometer?
    Regards

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts