Results 1 to 8 of 8

Thread: Versant 2100 Textured Stock Mottle

Hybrid View

  1. #1
    Join Date
    Dec 2016
    Posts
    2

    Default Versant 2100 Textured Stock Mottle

    Is there anything I can do to improve my prints on textured stock? I'm using digital papers, all machine parts are new/good, but I can't seem to print a decent image. I've tried to adjust the 2nd Bias Transfer with not much improvement. I'm hoping there is something I can do using Command Workstation and/or the Color Profiler Suite to improve image quality. Thanks.

  2. #2
    Doyle is offline Fiery Forum Expert Contributor Doyle is on a distinguished path
    Join Date
    Apr 2010
    Posts
    256

    Default

    Here is a thread you might want to look at,

    https://printplanet.com/forum/digita...x-versant-2100

  3. #3
    Join Date
    Dec 2016
    Posts
    2

    Default

    Quote Originally Posted by Doyle View Post
    Here is a thread you might want to look at,

    https://printplanet.com/forum/digita...x-versant-2100
    Thanks, but I've tried making that adjustment without any real improvement

  4. #4
    Doyle is offline Fiery Forum Expert Contributor Doyle is on a distinguished path
    Join Date
    Apr 2010
    Posts
    256

    Default

    Quote Originally Posted by ArrowPrinters View Post
    Thanks, but I've tried making that adjustment without any real improvement
    What difference does that NVM setting seem to make? I guess I am going to have to try it.

  5. #5
    Join Date
    Jul 2016
    Posts
    33

    Default Could be hardware related

    Often when I have this problem it's because the pressure roller behind the developer transfer belt is on its way out. If you're printing on allot of card stocks, these rollers can wear out prematurely and prevent the toner from being pushed into the paper's crevices properly.

    If you have the ability to adjust your settings you can compensate for this, but it only works for a while (if at all)

  6. #6
    Join Date
    Feb 2017
    Location
    Vermont
    Posts
    17

    Default

    Do you make custom alignment profiles for your paper?
    If so there is a setting in the paper profile that you can adjust the density or how much "ink" is put on the paper.

    *Paper tray settings
    *Custom paper settings
    *Select the stock
    *Adjust image transfer
    -Jessica Davenport

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts