Results 1 to 2 of 2

Thread: Ricoh 6501 settings for E-7200

  1. #1
    Join Date
    Sep 2013

    Default Ricoh 6501 settings for E-7200

    Need installation instructions for installing the fiery. Currently have the Copiers ip set to but this is not allowing scanning or any traffic from the copier to the network. Printing is setup and working. Thanks

  2. #2
    Join Date
    Nov 2015

    Default Scan with engine and not Fiery

    We do all our scanning setups thru the 6501 and not the fiery. You only need a second network drop or a switch. All prints go from network to fiery to printer, all outbound scanning goes from printer to network bypassing the Fiery.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts