Hi. I have a Fiery IC-308 connected to a KM C1070 that has some network connectivity issues. It will not recognize the network and does not assign addresses therefore won't connect to the network. It also intermittently loses connection to the engine. I have tried reloading system software but that did not resolve the issue. I noticed if you reboot the Fiery, and when you open CWS, it assigns weird IP addresses to the CWS for example, 127.0.0.1, or 100.100.100.1. It never shows the IP address on CWS that I manually entered for the Fiery.

The issue started yesterday as it intermittently was dropping off the network and now it's completely down. We tested the network and it's ok.

The Fiery is only 3 months old. I suspect a hardware issue with the motherboard as this unit does not have a dedicated network card. Is this a fair assumption?

Thanks,
Stu