Results 1 to 2 of 2

Thread: VDP Skewing Data versus Master

Hybrid View

  1. #1
    Join Date
    Aug 2014
    Posts
    2

    Default VDP Skewing Data versus Master

    I am trying to print a VDP job and am having a perplexing issue. When I add my data file over the master, they don't align. I'm seeing about 1.5mm of skew from the data file to the master. The lead edge aligns fine, but the trail edge is off. This shows up in the preview as well, so I know it's somewhere in the processing. Any ideas?

  2. #2
    Join Date
    Aug 2014
    Posts
    2

    Default

    Okay. So after posting this, I figured out the issue immediately. Just in case someone else ever has this problem, I'm posting the solution.

    It turns out that the Data File had Tray Alignment checked, while the Master File didn't. So the Fiery was processing the Data File with skew to adjust for the tray alignment settings. As long as both of them are checked or unchecked, the images should align.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts