Results 1 to 3 of 3

Thread: IC 413 error 91

Hybrid View

  1. #1
    Join Date
    Mar 2012
    Posts
    7

    Default IC 413 error 91

    I have ab KM IC 413, and after loading the system software 1.0 from USB I press the green shutoff and remove the USB and put Dipsw 1 back down. It then goes through the normal boot up shows 03 for a while and then shows a 91 in the boot window and shuts down after 30 seconds. During the time it shows 91 I can locate it with CWS but it won’t log on. Also I connected monitor to watch boot and can see windows start up and then goes blank, swapped out HDD and reformatted. Any suggestions

  2. #2
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    729

    Default

    Reloading a IC-413 can be a little tricky sometimes...

    * Have you successfully reloaded one of these in the past?

    * What is reason you are reloading this one?

    * What is version of USB Prep Tool you are using?

    * Was this IC-413 running v1.0 prior to reload attempt? Or was there a chance it had v1.1 or v1.11 previously on it?

    * Are you absolutely sure System Software DVD you are prepping the thumb drive with is for a v1.0 IC-413? System shutting down right away after reload often means wrong system software is being installed

    * what is size of USB thumb drive being used?

  3. #3
    Join Date
    Mar 2012
    Posts
    7

    Default

    * Have you successfully reloaded one of these in the past?
    Yes many times

    * What is reason you are reloading this one?
    Reloading for another Dealer that didn’t have the software to load

    * What is version of USB Prep Tool you are using?
    Version 1.3.1

    * Was this IC-413 running v1.0 prior to reload attempt? Or was there a chance it had v1.1 or v1.11 previously on it?
    Don’t know but they were not new fiery

    * Are you absolutely sure System Software DVD you are prepping the thumb drive with is for a v1.0 IC-413? System shutting down right away after reload often means wrong system software is being installed
    Same software Ive used in the past

    * what is size of USB thumb drive being used?
    Tried Kinston 8g
    Curser 8g
    Both have worked in past
    Last edited by DFWTP; 03-26-2014 at 11:04 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts