+ Reply to Thread
Results 1 to 7 of 7

Thread: Dual Network Cards with Solo

  1. #1
    Join Date
    Feb 2011
    Posts
    18

    Default Dual Network Cards with Solo

    I am looking for submission methods to Central in a environment where isolation from the intranet is required. I am inquiring on availability with dual nics supporting different subnets.

  2. #2
    adam1991 is offline Fiery Forum Expert Contributor adam1991 has proven very helpful adam1991 has proven very helpful adam1991 has proven very helpful adam1991 has proven very helpful adam1991 has proven very helpful
    Join Date
    Feb 2010
    Posts
    1,029

    Default

    With Solo? Nothing built in.

    USB NIC?

  3. #3
    Join Date
    Feb 2011
    Posts
    18

    Default

    What about with the integrated server?

  4. #4
    adam1991 is offline Fiery Forum Expert Contributor adam1991 has proven very helpful adam1991 has proven very helpful adam1991 has proven very helpful adam1991 has proven very helpful adam1991 has proven very helpful
    Join Date
    Feb 2010
    Posts
    1,029

    Default

    That hardware does have two NICs. (In fact, you must DISABLE the second one AND restart in order for FC to work properly, if you're not using the second NIC.)

  5. #5
    Join Date
    Feb 2011
    Posts
    18

    Default

    Is there any documentation supporting this?

  6. #6
    Join Date
    May 2012
    Posts
    4

    Default ipv6

    have you tryed setting up the rips on IPv6 and deactivate IPv4 so make a sort of subnett with the rips and FC on IPv6 and FC and rest of the nettwork on IPv4?
    /Arne

  7. #7
    Join Date
    Jun 2012
    Posts
    14

    Default

    use the NIC Labelled LAN as input and nic 2 to either a hub/switch or direct to engine of copier
    nic 2 can be configured in same range as printer/s

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts