Results 1 to 3 of 3

Thread: IC-412v1.1 Fiery scan can't use adf

  1. #1
    Join Date
    Jan 2018
    Posts
    5

    Default IC-412v1.1 Fiery scan can't use adf

    Greetings,
    I got my hands on a used bizhub c652DS, but fiery scan can't use the machine's biggest asset, the dual scanner document feeder.
    Controller runs v1.1 software with no patches.
    Fiery live update only reports a .ps vulnerability patch and a handful of obsolete PC and Mac drivers.
    In cws configuration page no adf is reported...
    Any ideas or patch that I miss?
    Attached Images    

  2. #2
    Steve0 is offline Fiery Forum Expert Contributor Steve0 is on a distinguished path
    Join Date
    Aug 2009
    Posts
    249

    Default

    Switching between the platen glass and the ADF is automatic. So, if you load your originals in the feeder, the ADF will start feeding as soon as you click on the [Scan] button. If the ADF is empty, the logic assumes an original has been placed on the platen glass, and scanning will automatically take place from there. So the "switch," so to speak, is whether or not there's anything in the ADF when you hit [Scan].

  3. #3
    Join Date
    Jan 2018
    Posts
    5

    Default

    With originals placed on the ADF, still the double or single side is greyed and can't be selected...
    Documents are fed from ADF but only 1 side is scanned.
    Same controller on c360 has double-single option, no matter if any documents are place in ADF.
    Last edited by antonisp; 01-18-2018 at 08:26 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts