We are having intermittent problems with a Fiery S2 connected to a Canon iR7095 Copier using Command Workstation 5.5 (We had similar and more frequent problems with earlier versions of the Command Workstation). The copier and the Fiery both have the latest system software installed. The problem(s) are specifically that when printing some booklet jobs no matter what we do with brightness or resolution, it comes out looking crappy. We ended up printing directly to the machine (Fiery) via Acrobat and the same job came out excellent. Also, we set output to be non-shifted but still the machine shifts every other sheet. Is it possible that there is some type of hardware-specific patch available for the Fiery S2 that I need to install in order for the machine to work properly through Command Workstation?