Results 1 to 2 of 2

Thread: Fiery E-42 on C901s

  1. #1
    Join Date
    Apr 2013
    Posts
    1

    Default Fiery E-42 on C901s

    I had to re-load System Software today with the original disks ... it loaded correctly, but when I get to the point where Command Workstation should come up the system continually re-boots.

    On occaision, I get the 'System Setup' screen where I'd expect to be able to put in the I.P. etc. but that just sits there until, yes, you guessed it, another reboot.

    I loaded System Software twice ... same thing each time.

    Reboots one after another.

    Any guesses???

  2. #2
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    404

    Default

    Hello,

    Is the Fiery controller connected to the engine when the controller is rebooting? It may sound strange but I'd try disconnecting from the engine and see if the controller comes to Idle.

    Thank you,
    Bruce

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts