Results 1 to 10 of 11

Thread: Silent Installation of CW 5.4.1

Threaded View

  1. #1
    Join Date
    Jul 2013
    Posts
    2

    Default Silent Installation of CW 5.4.1

    I have been trying to setup a silent/unattended installation of Fiery Command Workstation 5.4.1. I extracted the setup files from the FieryApplicationPackage401.exe file.

    When I manually run Fiery User Software Installer\setup.exe, the application is properly installed.

    I reverted my virtual system and ran setup.exe -r to create the Installshield response file. I copied the setup.iss file and placed it alongside the setup.exe.

    I reverted my system again and executed th following command:
    setup.exe -S -f1".\setup.iss" -f2"%TEMP%\Fiery541.log"

    The installation hangs on the dialog box which prompts for the Destination Folder and Language.

    I repeated the process to create the setup.iss file, but this time when prompted for the Destination Folder, I browsed and manually entered the folder name for installing the application.

    This installation continued to hang on the Destination Folder / Language dialog box. Once I clicked on Next, the installation continued without requiring interaction. I tried using -r and /r, -R and /R to create the setup.iss file as well as -s and -S, and /s and /S to apply the setup.iss file.

    I tried this with the new 5.5 version and had the same problem.

    When I reviewed the setup.iss file, I noticed that there was not a entry that corresponded to the language selected from that dialog box. I repeated the process of created the setup.iss file and chose a language other than English. This however did not cause a repsonse to be entered in the setup.iss file.

    Any ideas?

    Here is a opy of the setup.iss file that was generated when manually entering the Destination Folder name:

    [InstallShield Silent]
    Version=v7.00
    File=Response File
    [File Transfer]
    OverwrittenReadOnly=NoToAll
    [{79B3B34A-5828-4BDD-9716-2002C0596C71}-DlgOrder]
    Dlg0={79B3B34A-5828-4BDD-9716-2002C0596C71}-SdWelcome-0
    Count=8
    Dlg1={79B3B34A-5828-4BDD-9716-2002C0596C71}-SdLicense2Rtf-0
    Dlg2={79B3B34A-5828-4BDD-9716-2002C0596C71}-SelectDir-0
    Dlg3={79B3B34A-5828-4BDD-9716-2002C0596C71}-SdComponentDialog2-0
    Dlg4={79B3B34A-5828-4BDD-9716-2002C0596C71}-SdSelectFolder-0
    Dlg5={79B3B34A-5828-4BDD-9716-2002C0596C71}-AskYesNo-0
    Dlg6={79B3B34A-5828-4BDD-9716-2002C0596C71}-SdShowInfoList-0
    Dlg7={79B3B34A-5828-4BDD-9716-2002C0596C71}-SdFinishReboot-0
    [{79B3B34A-5828-4BDD-9716-2002C0596C71}-SdWelcome-0]
    Result=1
    [{79B3B34A-5828-4BDD-9716-2002C0596C71}-SdLicense2Rtf-0]
    Result=1
    [{79B3B34A-5828-4BDD-9716-2002C0596C71}-SelectDir-0]
    Result=1
    szDir=C:\Program Files (x86)\Fiery
    [{79B3B34A-5828-4BDD-9716-2002C0596C71}-SdComponentDialog2-0]
    Component-type=string
    Component-count=4
    Component-0=Fiery Command WorkStation
    Component-1=Fiery Remote Scan
    Component-2=Fiery Hot Folders
    Component-3=Fiery Bridge
    Result=1
    [{79B3B34A-5828-4BDD-9716-2002C0596C71}-SdSelectFolder-0]
    szFolder=Fiery
    Result=1
    [{79B3B34A-5828-4BDD-9716-2002C0596C71}-AskYesNo-0]
    Result=0
    [{79B3B34A-5828-4BDD-9716-2002C0596C71}-SdShowInfoList-0]
    Result=1
    [Application]
    Name=Fiery User Software
    Version=5.0
    Company=Electronics For Imaging
    Lang=0409
    [{79B3B34A-5828-4BDD-9716-2002C0596C71}-SdFinishReboot-0]
    Result=1
    BootOption=0

    Thanks.
    Last edited by sgunchar; 07-09-2013 at 08:03 AM. Reason: additional information

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts