+ Reply to Thread
Results 1 to 3 of 3

Thread: Fiery X3eTY2-10 65-55c-KM, Ikon or Konica Minolta IC-408?

  1. #1
    Join Date
    May 2012
    Posts
    9

    Default Fiery X3eTY2-10 65-55c-KM, Ikon or Konica Minolta IC-408?

    We acquired a used Ikon CPP 560 which came with an external Ikon Fiery PRO80 65-55C-KM rip attached to it. However it also came with an embedded Fiery X3eTY2-10 that we have no use for. I don't know if the X3eTY2 was originally attached to our 560 or if it came from some other machine - it was loose in the crate with some other extra parts.

    I would like to sell the X3eTY2, but I want to confirm exactly what machines it could work on so that I don't accidentally sell somebody something they can't use. I briefly attached the X3eTY2 to our 560 and it booted up and appeared to operate properly. I was able to print out the Fiery PS & PCL test pages along with the configuration page. Here is the info from the X3eTY2:

    Model: Fiery X3eTY2-10
    Part No: 45057701
    Serial No: T00194251
    Software: EFI Fiery System 8 Release 2
    Version: 2.0
    BIOS Ver: 1.20 08/07/06
    Printer: Fiery X3eTY2 65-55C-KM PS2.0

    Is this for the Ikon 550/560/650/660 series?

    Is it the same as a Konica Minolta IC-408 for the KM 5500/5501/6500/6051 series?

    If not can it be used on a KM machine with the proper software load?

    Thanks!

    ---
    Jeff Daghir
    MPS Printing, Inc.
    Madison, IN

  2. #2
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    522

    Default

    Yes, this Ikon X3eTY2 would work when connected to the Ikon 550/560/650/660 and the KM 5500/5501/6500/6501 series.

    Though it has v2.0 Ikon system software on it now, there was a v3.0 version released for it back in 2008. You may still be able to obtain that from Ricoh (not EFI). Note: this Fiery is no longer supported by Ricoh.

    Konica Minolta's equivalent Fiery system software (IC-408 v2.0) WILL NOT install on this Ikon controller because of a BIOS constraint- but you could still connect your Fiery to a KM-badged copier model listed above

  3. #3
    Join Date
    May 2012
    Posts
    9

    Default

    Thanks Scott! I greatly appreciate it.

    ---
    Jeff Daghir
    MPS Printing, Inc.
    Madison, IN, USA

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts