+ Reply to Thread
Results 1 to 2 of 2

Thread: DC250 EFI v.1.2 and CS4 INDD Issue ?

  1. #1
    Join Date
    Nov 2011
    Location
    Skævinge, Denmark
    Posts
    75

    Default DC250 EFI v.1.2 and CS4 INDD Issue ?

    Hi All

    Im having an issue at a Customer.
    A PDF File is placed in Indesign CS4. The Document is edited and sent to printer.

    The customer uses the Built in Feature "Print Booklet".
    In the Driver we choose the A4SEF, Fasten Mode Fold & Staple, Duplex settings.

    When we send this to the EFI the "Fasten Mode Fold & Staple" are set to "none".
    Eg the document just prints A4SEF, Duplex to the Top Tray.

    If we edit the job parameters afterwards and set the "Finishing Fasten Mode Fold & Staple" again and resubmit the job its prints fine.

    If I export to PDF (Adobe Reader X) and choose the "Booket Layout" and set the above "printer settings" it prints fine.

    I've attached the Configuration rapport from the EFI DC250.pdf.

    Hoping someone has input to the issue.. Thanks in advance.

  2. #2
    Join Date
    Nov 2011
    Location
    Skævinge, Denmark
    Posts
    75

    Default

    found the excat same issue on Create Suite Indesign 5.5 on a Xerox DC260 w/EFI v.2.0 ...
    there must be some kind of bug between the Indesign & EFI ....
    nobody had any insight on this?
    Last edited by Anders Juul Jensen; 04-11-2012 at 05:48 AM.

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts