+ Reply to Thread
Results 1 to 3 of 3

Thread: Fiery controller models with JDF support available

  1. #1
    Join Date
    Jul 2009
    Location
    Menlo Park, California
    Posts
    16

    Default Fiery controller models with JDF support available

    By far the best place to check to see if JDF support is available for specific Fiery controller models is the Supported Printers link at http://efi.com/fjdf. We use this as our reference even internally at EFI and it is usually updated at least once per month.
    --
    Mark Bui-Ford mark.bui-ford@efi.com
    Fiery Sr. Program Manager

  2. #2
    Join Date
    Jun 2017
    Posts
    4

    Default EB 32 v2.0

    Hi, are available JDF for EB-32 v2.0??

  3. #3
    Yusuke_K is offline Fiery Forum Expert Contributor Yusuke_K is on a distinguished path
    Join Date
    Jul 2009
    Posts
    75

    Default

    Yes Fiery JDF is available with EB-32. You can enable Fiery JDF by going to Device Center -> Fiery Configure -> Job Sumission -> JDF Settings.

    Hope this helps!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts