Results 1 to 3 of 3

Thread: Ikon IC 408 on a Konica Minolta C6500

  1. #1
    Join Date
    Aug 2011
    Posts
    4

    Default Ikon IC 408 on a Konica Minolta C6500

    some How I ended up with a Ikon Fiery Xe3TY2-10 off of a Ikon (konica Minolta) C6500
    The Problem is it had Ikon Version 3.0 software on it when we load Konica Minolta ver 2.0 it works for a few minute and I can even print a test page but it goes to LED code 91 than shuts off after a minute or two
    Is there any thing I can do to convert to Konica Minota system code?

    Thanks

  2. #2
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    404

    Default

    Hello Mike,

    Sorry but there's no conversion kit or method of conversion. Basically you'll need to obtain the IKON system software if you haven't already.

    Best regards,
    Bruce

  3. #3
    Join Date
    Aug 2011
    Posts
    4

    Default

    Quote Originally Posted by Bruce_W View Post
    Hello Mike,

    Sorry but there's no conversion kit or method of conversion. Basically you'll need to obtain the IKON system software if you haven't already.

    Best regards,
    Bruce
    Thanks I will

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts