Results 1 to 3 of 3

Thread: Impose not working

  1. #1
    Join Date
    Nov 2011
    Posts
    16

    Default Impose not working

    Hi guys,
    I recently installed CWS 5.3 and I do not see the impose option when I right click on a "Held" Job.
    If i go into properties and then into "layout", I see a grayed out impose.

    I have tried the dongle in different usb ports, but nothing. Do I need to install something for impose? Previously a technician had set it up for us so not sure whats needed.
    The dongle successfully loads the drivers so that is not the issue.

    Any ideas?

    Thanks

  2. #2
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    404

    Default

    Hello Percival,

    Is the job in the Hold queue Processed and Held? If so, Impose options won't show up for the job. If the job is already Processed, right-click on the job and choose Remove Raster. The Impose options should now be displayed.

    Best regards,
    Bruce

  3. #3
    Join Date
    Nov 2011
    Posts
    16

    Default

    Doh!
    Thanks Bruce, I should have known that :/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts