Results 1 to 2 of 2

Thread: Fiery Controller ports for Two Way Communication

  1. #1
    Join Date
    Dec 2010
    Posts
    20

    Default Fiery Controller ports for Two Way Communication

    I recently installed a xerox color 550 with integrated Fiery controller. The customer is very tight on their network and only open ports that are necessary. What ports need to be open to enable the two way communication for identifying installed options and available paper types? It seems that the standard 161, 162 and 391 used with snmp do not do the trick. Any suggestions?

  2. #2
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    404

    Default

    Hello,

    Please see this post. http://fieryforums.efi.com/showthread.php/2163

    I would recommend starting with these ports.

    8021-8022 (CWS)(Bidi)
    3050 (Paper Catalog)

    Thank you,
    Bruce

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts