Results 1 to 3 of 3

Thread: IC-408 V2.0 on BizHub Pro - patches prevent job processing

  1. #1
    Join Date
    Jan 2010
    Posts
    3

    Default IC-408 V2.0 on BizHub Pro - patches prevent job processing

    Our technician updated our IC-408 to V2.0, downloaded the manual install patches (as well as all of the auto-updates), and now our RAM now only reads 278.8 total available (was 512 in version 1.0-1.1). Is there a patch update for the ram upgrade in Version 2.0?
    Last edited by Lotus1; 01-21-2010 at 10:31 AM. Reason: Initial problem resolved.

  2. #2
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    404

    Default

    Where are you seeing 278MB of RAM reported?

    You should see 512MB of memory reported on the configuration page.

  3. #3
    Join Date
    May 2009
    Location
    Minneapolis, MN
    Posts
    729

    Default

    CWS does not show total installed system RAM (like Fiery Configuration page does). It shows the portion of total installed RAM that Fiery uses as it's frame buffer.

    The v2.0 IC-408 comes standard with 512MB RAM installed. But in CWS you would (correctly) see 196MB

    If you added an additional 512MB in other slot for a total of 1GB RAM installed, CWS should then show 278MB.

    By the way, 1GB is max supported installed RAM for this Fiery, and, for v2.0, you do not need to install a special patch in order for the additional RAM to be "seen" by Fiery.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts