PDA

View Full Version : Cannot create Printer Profile



Grahamd
10-19-2016, 09:14 PM
using Profile Suite 4.9.0.21 on Windows 7, and Spectro ES-2000 and trying to create a new Printer Profile for Versant 80.
I get to the stage when measuring P2P51 G7 measurement chart and the reading most times fails on row 7 after 5 attempts usually give up. If I do get past this point it always fails and I have to do another measurement chart and that always fails on row 9.
Only way I have got out of the situation was to create an express printer profile.
However would like to do the job properly.
Anyone have any ideas??

Lou_P
10-20-2016, 08:20 AM
Hi. It is hard to correctly measure the P2P with handheld; the grayfinder patches are just not different enough to properly differentiate which direction you are measuring. In the next dot release 4.9.1 due later this year we have added a random P2P that will be easier to measure with a handheld instrument. For the current problem can you make a calibration and profile using Printer Profiler if you don't include G7?

~Lou