PDA

View Full Version : Windows Print Server a Fiery CS665 Pro



kjricso2015
11-12-2015, 10:07 AM
I have a windows print server where all the printers and drives are install. The windows part works fine the issue I have is with Mac OS.
I have the drive installed on the Mac and add the Printer. I then try to enable Two Way Communication and it says DNS name not found and the field is not edible. Here is some screenshots. Any ideas would be great.

kjricso2015
11-12-2015, 10:09 AM
More Photos

Greta_C
11-12-2015, 04:47 PM
There's a patch for that.

Go here
http://www.efi.com/support-and-downloads/download-center/

Grab this patch, install over the top.

1343

kjricso2015
11-13-2015, 06:27 AM
I can't install this as it says there is no compatible software found.

Bob_B
11-13-2015, 02:56 PM
On the Mac, can you try making an IP connection using LPD?

kjricso2015
11-16-2015, 07:40 AM
Doing it this way works but trying to do it the way with windows print server does the error.

Bob_B
11-16-2015, 01:41 PM
It sounds like making an IP connection directly to the Fiery works, but not when connecting through the print server. Is this correct?

Have you tried making a Windows connection to the print server?

kjricso2015
11-17-2015, 06:25 AM
I have no issues with the windows connection doing through the windows print server.