PDA

View Full Version : ES-1000 problem



webbs
01-30-2012, 07:44 AM
Hello all,

i have following problem with my ES-1000 spectrometer.
Due to some reasons i must connect the ES-1000
directly to my PRO 80 server.
calibration must be done on an other machine. Therefor i have
to use the ES-1000 with an USB extension cable (5m), but it doesn't work.

Must the cable fit some special requirements or is it
impossible in general in this way ? :(

Any suggestion welcome!

Thanks,

webbs

Rod_C
02-05-2012, 03:45 PM
Hello,
You should be able to connect the ES-1000 to any other client computer that you have in your office that is running CWS (Command WorkStation). Using a long USB extension cord will sometime cause problems with the ES-1000 due to signal loss. One alternative is to use a powered USB hub.
Regards,
Rod.