PDA

View Full Version : Gray boxes surrounding bitmaps



eddiepronta
05-17-2011, 04:44 AM
We are running a Fiery PRO 80 on a MGI DP60Pro. All our prints were fine until the RIP hung. We reloaded the software and now all prints with bitmaps have a gray box around them, even the files printed before the reload which were fine

Rod_C
05-23-2011, 06:36 PM
Hello eddiepronta,
Itís difficult to diagnose the issue without seeing the output or the files. Since you have re-installed the Fiery system, then all the settings will now be factory default. Please make sure that you calibrate the system, preferably with an ES-1000.
Also the jobs you are printing might contain transparency, and you may need to enable Composite Overprint for them to print correctly.
There may also be several Fiery patches that should be reloaded.
Regards,
Rod.

eddiepronta
05-25-2011, 07:12 AM
We have found that if we select "none" in the Source setting of CMYK/Grayscale in Color Management the gray bounding box does not appea