PDA

View Full Version : DC 250 v1.2 Bustled fiery sftwre



Milo Wilson
10-26-2010, 05:45 PM
When I send jobs to the Hold que it automatically prints the file. How can I have it stay in the Hold que without printing?

thistlegorm
10-26-2010, 10:11 PM
Two probable things here, first the default printer on the Fiery is more than likely set to "Print".

Second the Printer on the PC you are printing from has had it's Port set to RAW & 9100 (default on a standard IP Port) rather than LPR.

Assuming you have the correct permissions on your PC right click on your Fiery Printer & select Properties => then Ports & you should see a tick against something like IP_XXX.XXX.XXX.XXX highlight & select configure.
Change the Radio Button for the Print Protocol from raw to lpr & in the lpr settings change the queue to hold ( the box that says lp in the screenshot below ). That should do the trick.

http://fieryforums.efi.com/attachment.php?attachmentid=337&stc=1&d=1288156380