PDA

View Full Version : What's the procedure to factory calibrate my ES-1000



Derrick_M
07-15-2010, 10:30 AM
In the bag of the colorprofiler suite is a declaration from X-rite that the ES1000 is calibrated. Also on this declaration is a next calibration date.

Question:What is the procedure to factory calibrate my ES1000.

Derrick_M
07-15-2010, 10:31 AM
You will have to send it into Xrite to have it recalibrated.

http://www.xrite.com/top_contact.aspx

Derrick_M
07-15-2010, 01:46 PM
Try Debbie, fantastic service and it took only a week from the UK, they even arrange collection!!

"All EyeOne instruments are serviced at head quarters in Switzerland, please complete the attached RMA form for each instrument and return to me when you are ready ship each instrument. I will then obtain a returns number for you and also provide you with the shipping documents and a UPS account number to use to forward the instruments to Switzerland.
Prices as follows

Service and Recertification £105.00 per instrument
or
Repair including Recertification £170.00 per instrument
Plus return shipping

If you need any further assistance, do not hesitate to contact me.
Kind Regards
Debbie"

DPayne@xrite.com

Sara Añazgo Ruiz
07-20-2010, 11:33 AM
I need calibrate my engine. I don´t know. Help me, please

engine: KM C6501
Fiery : IC 408
Color Profile Suite v 3.0

Thanks

Sara

Derrick_M
07-22-2010, 08:26 AM
Sara,

Are you using CPS to calibrate your engine? What part of the calibration process do you have a question about?

Sara Añazgo Ruiz
08-09-2010, 10:37 AM
The C6501 is calibrated, but I have difficulty to calibrate the Fiery (IC-408).
Calibrate the Fiery with the ES-1000 through the CWS 5.0, and verify that the calibration has been well by printing the compared page, but when I print gradations of each color in another graphic software are contaminated. This does not happen when calibrate the Fiery from the C6501, then not allow me to use the ES-1000, only ColorCal.

Thanks for your help

Sara

Tommy_L
08-10-2010, 02:24 PM
The C6501 is calibrated, but I have difficulty to calibrate the Fiery (IC-408).
Calibrate the Fiery with the ES-1000 through the CWS 5.0, and verify that the calibration has been well by printing the compared page, but when I print gradations of each color in another graphic software are contaminated. This does not happen when calibrate the Fiery from the C6501, then not allow me to use the ES-1000, only ColorCal.

Thanks for your help

Sara

Are you tring to calibrate the Fiery just using ColorCal in Command Workstation, or have you tried calibrating using Color Profile Suite?

Sara Añazgo Ruiz
08-11-2010, 02:22 PM
I am tring to calibrate the Fiery just using Color Profiler Suite.