PDA

View Full Version : 64 bit driver for a pro80 v3.0



stilley
05-28-2010, 02:38 AM
I cannot find a 64 bit driver for the pro80 controller connected to a cpp650 ar a km pro c6500e:(

Rune_C
05-28-2010, 03:04 AM
Hi Stilley,

You can find 64bit drivers for the IC-305 on www.konicaminolta.eu

Scott_W
06-01-2010, 08:02 AM
You indicate you have a v3.0 Pro80 for Ikon CPP650. The driver that ships with this Ikon Fiery (on User Software DVD and available too from WebTools/Downloads) is already Windows 64-bit compatible.

I'm assuming the v3.0 Fiery system software you have installed on your Pro80 is Ikon Fiery System 8 Rel2?

However, if you have installed the Konica Minolta (KM) v3.0 Fiery system software on your Pro80, the answer to your 64-bit question is same as above. The driver that ships with this KM Fiery (on User Software DVD and available too from WebTools/Downloads) is already Windows 64-bit compatible.

The Ikon v3.0 is very different from the KM v3.0, as are the print drivers.

To determine for sure what v3.0 is installed, connect to Fiery from CWS5, select "Device Center" tab along top of CWS5 screen, then "General Info". Look for "Fiery System". If you see "9", it's the KM v3.0

If you see "8 Release 2", it's the Ikon v3.0