View Full Version : Automatic output tray (riddle) - Xerox 700

07-17-2009, 11:49 AM
We don't get rid of the behavior using the setting using "automatic" output tray (on our setting with the prof. finisher with booklet maker).

When does the Xerox 700DCP use which output tray if we let himself choose by use the automatic?

Sometimes first side comes out the upper tray, the second side in the middle tray (using a 2 sided manual duplex job).
Next time using paper tray 6 (big tray) the output goes to the upper tray - in tray 6 are 2000 sheets (with a copies setting of > 900) but in upper tray only fits a very small part of this sheets. So why the machine doesn't use only output tray which is capable to hold all the sheets?
And so on ...

07-23-2009, 03:38 PM
This issue appears to be a general Fiery question which is outside the scope of the Fiery Command WorkStation 5 forum. I would recommend working with your dealer to resolve this issue.